Husky 435 Oil Leak Fix

  "This piece of junk chainsaw you sold me leaked oil all over my new Igloo cooler. I haven't even cut any wood with it and its already making a mess. In my 40 years of cutting I've never seen such a piece of junk". 

 Its possible for a new saw to leak oil and a little oil leakage could be considered normal. Whats not normal is for a person thats been cutting for 40 years not to know a saw might leak on a new cooler. We gave him his money back and it turns oil the only oil that dripped was from oil slinging off the chain and sticking to the clutch cover only later to lose to gravity and end up on his new cooler.

 This video addresses how I repair the most common leak on the Husqvarna 435, 445 and 450 saws.

Check it out: https://youtu.be/CR8upOEW5aA

Later.

Husky 550XP Oil Pump Repair

  How to swap out an oil pump on a Husqvarna 550XP chainsaw along with the reasons a noisy muffler gets changed.

Check it out: https://youtu.be/JLdttGGLbB8

Later.

Husky 257 Fuel Hose

 A look at a Husky 257 that a customer brought in for repair. How I got it running for cheap and cheated myself out of a new saw sale.

Check it out: https://youtu.be/G7KiNc974ag

Later.

Stihl Chainsaw Fuel Line Repair

  Another "Over The Bench" video. Yippee.

This is a common repair for me. I'd say that these fuel hoses are the weak link on this era Stihl chainsaw.

Check it out: https://youtu.be/-4f1RQufFfY

Later.

Another Chance To Figure Out What Went Wrong

  A while back I posted a video where I made a mistake and you had the opportunity to figure out how I screwed up. Here is another chance for you to play detective. Again, no engine repair knowledge required.

Check it out: https://youtu.be/TGK2GjJBSn0

Later.

One Year Toolbox Update

  Its been about a year since I started showing you tool box improvements so I decided on doing an update. Some things worked out better than others.

Check it out: https://youtu.be/AlsDDueCFKo

Later.

Husky 346 Base Gasket Leak

  A quick repair to get the customer back into the wood. Next week I'll have a more traditional video here to share with you.

Check it out: https://youtu.be/r-MBeH66mqg

Later.

Husky K970 Concrete Saw

  Nothing to see here but a filthy concrete saw that needs an ignition module.

Check it out: https://youtu.be/9L4ORCzfPHI

Later.

Husky T540 Not Oiling

  It was a Friday afternoon at work and I was finishing up a chainsaw repair. Nothing special about this repair and I wasn't in some kind of hurry to get it done. In fact it didn't matter to me if I finished it up that day or not. Later when I was at home eating dinner it hit me like a ton of bricks...BLAMO! I forgot to tighten a screw on that last repair! This wasn't good news because I'm not the type of person to just say "I'll get it on Monday". Doing that would mean two nights of no sleep wondering if I had really forgotten or if I was just losing my mind. 

 I used this as an excuse for a bike ride and headed over to the shop. I walked in, grabbed a wrench and driver, grabbed the saw and took the side cover off. No kidding, I really did forget to tighten that one screw. Its funny how the mind works, or at least how mine works.

Check it out: https://youtu.be/EDd3WVS1WeA

Later.